Screw-In Light Converters and Extenders
Convert Down Light Into Adjustable Light
L21708 Lite-Flex Swivel Socket
22708 Mini-Cone Shade
Cover Recessed Fixture Opening With Accessory Close-Up Cover Plate 29010
|
With a simple turn of your wrist, existing rigid fixtures or recessed down lights become instantly adjustable. Illumination can now be placed in any direction needed.
Swivelier light extender units are the easiest and most economical means of converting recessed fixtures into an adjustable light source.
Swivelier's patented spring tension swivel rotates a full 360 degrees and angles 90 degrees. The swivel socket stays put without levers or set screws. A touch of the finger puts the light in any direction you desire for maximum flexibility.
Socket Extenders easily screw into an existing medium base socket and allows you to extend lamp position.
Extender lights are available for use with line voltage halogen lamps, ceramic metal halide PAR lamps (120 volt to 277 volt), and for 12 volt low voltage halogen lamps. The low voltage versions have a built-in electronic transformer that let you easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt MR-16 up to 50 watts; or 12 volt AR-111 and PAR-36 halogen reflector lamps up to 75 watts.
The male screw in base features a built-in ratchet mechanism that prevents over tightening of lamp.
To approximate the straight down extension dimension from the existing socket to the bottom of the Extender or Light Converter unit, subtract one inch from the overall length (O.L.) dimension. The extension dimension will vary depending upon how the adjustable swivel light is angled and positioned. Two light models are angled from their base, so the extension dimension will also vary depending upon their adjustment position.
To cover the opening of a recessed fixture, order accessory Close-Up Cover Plate 29010 or 29011. These cover plates can be used with all Swivelier Screw-In Extenders.
Two attachment springs hook between the cover plate to holes or slots in the recessed housing to secure the cover plate to the recessed fixture. The Extender then passes through a two inch opening where it is easily screwed into the light socket.
The 29010 (8" diameter), or 29011 (6" diameter) cover plate provides a finished look to the ceiling lighting.
Swivelier Screw-In Light Converters and Extenders are manufactured in the USA for quality assurance and long lasting dependability.
|
Lite-Flex Swivel Socket
L21701 L21702
L21705 L21706
L21708 L21709
L21711 L21712
|
LITE-FLEX SWIVEL SOCKET SCREW-IN EXTENDERS
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
For medium base PAR-20, PAR-30 & PAR-38 LED, Halogen or CFL spot or flood reflector lamps up to 150 watts.
Swivel socket dimensions: Length 3"; Width 1-3/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
L21701
|
BK, WH
|
Single Lite-Flex Screw-In
|
-
|
4-1/2"
|
L21702
|
BK, WH
|
Double Lite-Flex Screw-In
|
-
|
4-3/4"
|
L21705
|
BK, WH
|
Single Lite-Flex Screw-In, Stem
|
5"
|
9-3/8"
|
L21706
|
BK, WH
|
Double Lite-Flex Screw-In, Stem
|
5"
|
9-3/4"
|
L21708
|
BK, WH
|
Single Lite-Flex Screw-In, Stem
|
8"
|
12-1/2"
|
L21709
|
BK, WH
|
Double Lite-Flex Screw-In, Stem
|
8"
|
12-7/8"
|
L21711
|
BK, WH
|
Single Lite-Flex Screw-In, Stem
|
11"
|
15-1/2"
|
L21712
|
BK, WH
|
Double Lite-Flex Screw-In, Stem
|
11"
|
15-7/8"
|
Micro-Mini Cylinder
21605 21608
21611
|
CAST MICRO-MINI CYLINDER LAMP HOLDER
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
For medium base PAR-20, PAR-30 (long neck), & PAR-38 LED, Halogen, Metal Halide or CFL spot or flood reflector lamps up to 250 watts. 4KV Pulse rated 660W-600V porcelain female medium base socket for use on 120v to 277v.
Micro-Mini cylinder & swivel dimensions: Length 4-3/8"; Width 2"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
21605
|
WH
|
Single Micro-Mini Screw-In, Stem
|
5"
|
10-3/8"
|
21608
|
WH
|
Single Micro-Mini Screw-In, Stem
|
8"
|
13-1/2"
|
21611
|
WH
|
Single Micro-Mini Screw-In, Stem
|
11"
|
16-1/2"
|
Mini-Halogen Orbiter
21905 21906
21908
21911
21914 21915
|
MINI-HALOGEN & ORBITER
SCREW-IN EXTENDER & LIGHT CONVERTERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES16/20 or ESD16/20 halogen lamps up to 75 watts.
Mini-Halogen shade & swivel dimensions: Length 2-7/8"; Width 1-1/2"
Orbiter shade & swivel dimensions: Length 4-1/8"; Width 3-3/16"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
21905
|
AL,BK,WH
|
Single Mini-Halogen Screw-In, Stem
|
5"
|
9-1/4"
|
21906
|
AL,BK,WH
|
Double Mini-Halogen Screw-In, Stem
|
5"
|
9-3/4"
|
21908
|
AL,BK,WH
|
Single Mini-Halogen Screw-In, Stem
|
8"
|
12-3/8"
|
21909
|
AL,BK,WH
|
Double Mini-Halogen Screw-In, Stem
|
8"
|
12-7/8"
|
21911
|
AL,BK,WH
|
Single Mini-Halogen Screw-In, Stem
|
11"
|
15-3/8"
|
21912
|
AL,BK,WH
|
Double Mini-Halogen Screw-In, Stem
|
11"
|
15-7/8"
|
21914
|
AL,BK,WH
|
Single Orbiter Screw-In, Stem
|
11"
|
16-3/4"
|
21915
|
AL,BK,WH
|
Double Orbiter Screw-In, Stem
|
11"
|
17-1/8"
|
Smart-Cone Shade
22605 22606
22608 22609
22611 22612
|
SMART-CONE SHADE SCREW-IN EXTENDERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES20 or ESD20 halogen lamps up to 75 watts.
Smart-Cone shade & swivel dimensions: Length 4-1/2"; Width 2-7/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22605
|
WH
|
Single Smart-Cone Screw-In, Stem
|
5"
|
11"
|
22606
|
WH
|
Double Smart-Cone Screw-In, Stem
|
5"
|
11-3/8"
|
22608
|
WH
|
Single Smart-Cone Screw-In, Stem
|
8"
|
14-1/8"
|
22609
|
WH
|
Double Smart-Cone Screw-In, Stem
|
8"
|
14-1/2"
|
22611
|
WH
|
Single Smart-Cone Screw-In, Stem
|
11"
|
17-1/8"
|
22612
|
WH
|
Double Smart-Cone Screw-In, Stem
|
11"
|
17-1/2"
|
Mini-Cone Shade
22701 22702
22705 22706
22708 22709
22711 22712
|
MINI-CONE SHADE
SCREW-IN EXTENDER & LIGHT CONVERTERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES16 or ESD16 halogen lamps up to 50 watts.
Mini-Cone shade & swivel dimensions: Length 4-1/8"; Width 2-5/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22701
|
AL,BK,WH
|
Single Mini-Cone Screw-In
|
-
|
6-3/8"
|
22702
|
AL,BK,WH
|
Double Mini-Cone Screw-In
|
-
|
5-7/8"
|
22705
|
AL,BK,WH
|
Single Mini-Cone Screw-In, Stem
|
5"
|
10-1/2"
|
22706
|
AL,BK,WH
|
Double Mini-Cone Screw-In, Stem
|
5"
|
10-7/8"
|
22708
|
AL,BK,WH
|
Single Mini-Cone Screw-In, Stem
|
8"
|
13-5/8"
|
22709
|
AL,BK,WH
|
Double Mini-Cone Screw-In, Stem
|
8"
|
14"
|
22711
|
AL,BK,WH
|
Single Mini-Cone Screw-In, Stem
|
11"
|
16-5/8"
|
22712
|
AL,BK,WH
|
Double Mini-Cone Screw-In, Stem
|
11"
|
17"
|
22800 Shown with AR-111 Lamp
22800 Shown with PAR-36 Lamp
|
SUPER SPOT SCREW-IN LIGHT CONVERTER
Light Converter let you use low voltage lamps for energy efficiency and to achieve tight beam spreads.
Converts 120 volt medium base socket to 12 volts for use with 12 volt AR-111 or PAR-36 lamps up to 75 watts.
Most existing ceiling lights, track lights, or recessed lights are easily converted to low voltage by simply removing the existing lamp and screwing in the Swivelier Light Converter.
Easily replace a PAR-38 lamp with either a 12 volt AR-111 or PAR-36 lamp.
Compact in size, the light converter maintains similar dimensions of a PAR-38 lamp.
Converter has built-in electronic transformer.
Light Converter dimensions: Overall Length 5-1/2"; Width 4-3/4"
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22800
|
BK, WH
|
Super Spot Screw-In Light Converter
|
-
|
5-1/2"
|
22805 Shown with PAR-36 Lamp
22805 22806
22808 22809
22811 22812
|
SUPER SPOT SCREW-IN EXTENDERS
Screw-In Extender and Light Converter let you use easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt AR-111 or PAR-36 halogen reflector lamps up to 75 watts.
Achieve energy efficiency and tight beam spreads.
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converter has built-in electronic transformer.
Super Spot ring & swivel dimensions: Length 5-3/4"; Width 4-3/4"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22805
|
AL,BK,WH
|
Single Super Spot Ring Screw-In, Stem
|
5”
|
12-1/2”
|
22806
|
AL,BK,WH
|
Double Super Spot Screw-In, Stem
|
5”
|
12-7/8”
|
22808
|
AL,BK,WH
|
Single Super Spot Ring Screw-In, Stem
|
8"
|
15-1/2"
|
22809
|
AL,BK,WH
|
Double Super Spot Screw-In, Stem
|
8"
|
15-7/8"
|
22811
|
AL,BK,WH
|
Single Super Spot Ring Screw-In, Stem
|
11"
|
18-1/2"
|
22812
|
AL,BK,WH
|
Double Super Spot Screw-In, Stem
|
11"
|
18-7/8”"
|
22900
|
MR-16 SCREW-IN LIGHT CONVERTER
Light Converter let you use low voltage lamps for energy efficiency and to achieve precise controlled beam spreads. Converts 120 volt medium base socket to 12 volts for use with 12 volt MR-16 lamps, with front glass lens, up to 50 watts.
Most existing ceiling lights, track lights, or recessed lights are easily converted to low voltage by simply removing the existing lamp and screwing in the Swivelier Light Converter.
Easily replace a PAR-20, PAR-30 or PAR-38 lamp with a 12 volt MR-16 lamp.
Very compact in size, the light converter has a built-in electronic transformer.
Light Converter dimensions: Overall Length 4-3/8"; Width 2-1/2"
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22900
|
BK, WH
|
MR-16 Screw-In Light Converter
|
-
|
5-1/2"
|
22901
22905 22908
22911
|
MR-16 SCREW-IN EXTENDERS
Screw-In Extender and Light Converter let you use easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt MR-16 halogen reflector lamps up to 50 watts.
Achieve energy efficiency and precise controlled beam spreads.
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converter has built-in electronic transformer.
MR-16 Shade & swivel dimensions: Length 2-7/8"; Width 1-1/2"
Transformer housing dimensions:
Round Housing: Width 2-1/2”; Depth 1-1/2”
Rectangular Housing: Width 1-3/4" x 1"; Depth 2-3/4"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22901
|
AL,BK,WH
|
Single MR-16 Screw-In
|
-
|
6-3/4”
|
22905
|
AL,BK,WH
|
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
|
5”
|
9”
|
22908
|
AL,BK,WH
|
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
|
8"
|
12”
|
22911
|
AL,BK,WH
|
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
|
11"
|
15”
|
Torpedo Shade
22072
|
TORPEDO SHADE SCREW-IN EXTENDERS
Torpedo shade for PAR-38 lamps.
Use medium base reflector halogen lamps, maximum 150 watts.
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
Torpedo shade & swivel dimensions: Length 8-1/2"; Width 5-5/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
22072
|
WH
|
Torpedo Shade, PAR-38
|
11"
|
23-1/4"
|
29010 Close-Up Cover Shown with Extender
29010 29011
|
CLOSE-UP COVER PLATE
Use cover plate with all Swivelier Screw-In Extenders to cover recessed fixture opening.
Provides a finished look to the ceiling lighting.
Two attachment springs hook between cover plate and holes or slots in recessed housing to secure cover plate to recessed fixture. Extender then passes through a two inch opening where it is easily screwed into the light socket. Available in two sizes. Use 8" diameter for 6-7" recessed housings. Use 6" diameter for 4-5" recessed housings.
|
Item
|
Finish
|
Description
|
29010
|
WH
|
Close-Up Cover Plate for use with all Swivelier Screw-In Extenders. 8" diameter, 1/4" deep.
|
29011
|
WH
|
Close-Up Cover Plate for use with all Swivelier Screw-In Extenders. 6" diameter, 1/4" deep.
|
29980
29981 29985
150 Watt Custom Length
Straight Extender
250 Watt Custom Length
Straight Extender
150 Watt Custom Length
Adjustable Swivel Socket Extender
|
STRAIGHT EXTENDER FOR MEDIUM BASE LAMPS
|
Item
|
Finish
|
Description
|
Stem
|
O.L.
|
29980
|
-
|
Deluxe 2" Socket Straight Extender. Medium to medium base. Rated 660W-250V. Maximum 150 watts.
|
-
|
3-1/8"
|
29981
|
-
|
Deluxe 2-1/8" Socket Straight Extender. Medium to medium base. 4KV Pulse Rated 660W-600V. Use for LED, Halogen, CFL or Metal Halide lamps on 120v to 277v. Maximum 250 watts.
|
-
|
3-1/4"
|
29985
|
-
|
Mogul to Medium Base Adapter. Rated 660W-250V.
|
-
|
-
|
CUSTOM LENGTH STRAIGHT EXTENDER
FOR MEDIUM BASE LAMPS
|
Special
Number
|
-
|
Custom Length Non-Adjustable
Straight Extender. Maximum 150 Watts. Medium to Medium Base. Rated 660W-250V.
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
|
-
|
-
|
Special
Number
|
-
|
Custom Length Non-Adjustable
Straight Extender. Maximum 250 Watts. Medium to Medium Base. 4KV Pulse Rated 660W-600V.
Use for Halogen or Metal Halide lamps on 120v to 277v.
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
|
-
|
-
|
CUSTOM LENGTH ADJUSTABLE EXTENDER
FOR MEDIUM BASE LAMPS
|
Special Number
|
-
|
Custom Length Adjustable
Lite-Flex Swivel Socket Extender.
Maximum 150 Watts
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
|
-
|
-
|
29984
Socket sideways Socket face up
Use One 29984 Use Two 29984
Shown with L21705 Extender
|
RIGHT ANGLE MEDIUM BASE SOCKET ADAPTER
Converts a horizontal facing medium base socket for use with Swivelier Extenders.
|
Item
|
Finish
|
Description
|
29984
|
-
|
Medium to Medium 90º Elbow
Use an Elbow in a recessed fixture with a side mounted, horizontal facing medium base socket.
With a 90º Elbow, you can screw in an Extender so that the Extender stem is mounted vertically.
You can also use the 90º Elbow to vertically mount screw-in medium base PAR-20, PAR-30 or PAR-38 LED, Halogen or CFL spot or flood reflector lamps.
When used with chandeliers that have an upward facing medium base socket, use two Elbows, creating a 180º bend. Then screw in an Extender so the Extender mounts vertically.
Elbow has built-in ratchet mechanism that permits adjustment of the Elbow socket for proper alignment.
|
Lighting Accessories
29835 29836
|
CLIP-ON CYLINDER FIXTURE ACCESSORIES
|
Item
|
Finish
|
Description
|
29835
|
BK, WH
|
PAR-38 Clip-On Cylinder, 5-5/8" diameter
|
29836
|
BK, WH
|
PAR-30 Clip-On Cylinder, 4-1/8" diameter
|
Specify Color: (AL) Silver Aluminum, (BK) Black, (WH) White
Lamps not included
|