Screw-In Light Converters and Extenders


Convert Down Light Into Adjustable Light
L21708 Lite-Flex Swivel Socket



22708 Mini-Cone Shade


Cover Recessed Fixture Opening With Accessory Close-Up Cover Plate 29010


With a simple turn of your wrist, existing rigid fixtures or recessed down lights become instantly adjustable. Illumination can now be placed in any direction needed.
Swivelier light extender units are the easiest and most economical means of converting recessed fixtures into an adjustable light source.
Swivelier's patented spring tension swivel rotates a full 360 degrees and angles 90 degrees. The swivel socket stays put without levers or set screws. A touch of the finger puts the light in any direction you desire for maximum flexibility.
Socket Extenders easily screw into an existing medium base socket and allows you to extend lamp position.
Extender lights are available for use with line voltage halogen lamps, ceramic metal halide PAR lamps (120 volt to 277 volt), and for 12 volt low voltage halogen lamps. The low voltage versions have a built-in electronic transformer that let you easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt MR-16 up to 50 watts; or 12 volt AR-111 and PAR-36 halogen reflector lamps up to 75 watts.
The male screw in base features a built-in ratchet mechanism that prevents over tightening of lamp.
To approximate the straight down extension dimension from the existing socket to the bottom of the Extender or Light Converter unit, subtract one inch from the overall length (O.L.) dimension. The extension dimension will vary depending upon how the adjustable swivel light is angled and positioned. Two light models are angled from their base, so the extension dimension will also vary depending upon their adjustment position.
To cover the opening of a recessed fixture, order accessory Close-Up Cover Plate 29010 or 29011. These cover plates can be used with all Swivelier Screw-In Extenders.
Two attachment springs hook between the cover plate to holes or slots in the recessed housing to secure the cover plate to the recessed fixture. The Extender then passes through a two inch opening where it is easily screwed into the light socket.
The 29010 (8" diameter), or 29011 (6" diameter) cover plate provides a finished look to the ceiling lighting.
Swivelier Screw-In Light Converters and Extenders are manufactured in the USA for quality assurance and long lasting dependability.




 
Lite-Flex Swivel Socket
  
L21701                                  L21702
   
L21705                                  L21706
   
L21708                                   L21709
   
L21711                                   L21712


LITE-FLEX SWIVEL SOCKET SCREW-IN EXTENDERS
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
For medium base PAR-20, PAR-30 & PAR-38 LED, Halogen or CFL spot or flood reflector lamps up to 150 watts.
Swivel socket dimensions: Length 3"; Width 1-3/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
L21701
BK, WH
Single Lite-Flex Screw-In
-
4-1/2"


L21702
BK, WH
Double Lite-Flex Screw-In
-
4-3/4"


L21705
BK, WH
Single Lite-Flex Screw-In, Stem
5"
9-3/8"


L21706
BK, WH
Double Lite-Flex Screw-In, Stem
5"
9-3/4"


L21708
BK, WH
Single Lite-Flex Screw-In, Stem
8"
12-1/2"


L21709
BK, WH
Double Lite-Flex Screw-In, Stem
8"
12-7/8"


L21711
BK, WH
Single Lite-Flex Screw-In, Stem
11"
15-1/2"


L21712
BK, WH
Double Lite-Flex Screw-In, Stem


11"
15-7/8"


Micro-Mini Cylinder

   
 21605                                   21608
 
  21611
CAST MICRO-MINI CYLINDER LAMP HOLDER
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
For medium base PAR-20, PAR-30 (long neck), & PAR-38 LED, Halogen, Metal Halide or CFL spot or flood reflector lamps up to 250 watts. 4KV Pulse rated 660W-600V porcelain female medium base socket for use on 120v to 277v.
Micro-Mini cylinder & swivel dimensions: Length 4-3/8"; Width 2"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
21605
WH
Single Micro-Mini Screw-In, Stem


5"
10-3/8"
21608
WH
Single Micro-Mini Screw-In, Stem


8"
13-1/2"
21611
WH
Single Micro-Mini Screw-In, Stem


11"
16-1/2"

 
            Mini-Halogen                             Orbiter



 
21905                                   21906

21908

21911

 
21914                                    21915



MINI-HALOGEN & ORBITER
SCREW-IN EXTENDER & LIGHT CONVERTERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES16/20 or ESD16/20 halogen lamps up to 75 watts.
Mini-Halogen shade & swivel dimensions: Length 2-7/8"; Width 1-1/2"
Orbiter shade & swivel dimensions: Length 4-1/8"; Width 3-3/16"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
21905
AL,BK,WH
Single Mini-Halogen Screw-In, Stem
5"
9-1/4"


21906
AL,BK,WH
Double Mini-Halogen Screw-In, Stem


5"
9-3/4"
21908
AL,BK,WH
Single Mini-Halogen Screw-In, Stem
8"
12-3/8"


21909
AL,BK,WH
Double Mini-Halogen Screw-In, Stem


8"
12-7/8"
21911
AL,BK,WH
Single Mini-Halogen Screw-In, Stem
11"
15-3/8"


21912
AL,BK,WH
Double Mini-Halogen Screw-In, Stem


11"
15-7/8"
21914
AL,BK,WH
Single Orbiter Screw-In, Stem
11"
16-3/4"


21915
AL,BK,WH
Double Orbiter Screw-In, Stem
11"
17-1/8"



Smart-Cone Shade

 
22605                                     22606

  
22608                                     22609

  
22611                                     22612
SMART-CONE SHADE SCREW-IN EXTENDERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES20 or ESD20 halogen lamps up to 75 watts.
Smart-Cone shade & swivel dimensions: Length 4-1/2"; Width 2-7/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
22605
WH
Single Smart-Cone Screw-In, Stem

5"
11"
22606
WH
Double Smart-Cone Screw-In, Stem

5"
11-3/8"
22608
WH
Single Smart-Cone Screw-In, Stem

8"
14-1/8"
22609
WH
Double Smart-Cone Screw-In, Stem

8"
14-1/2"
22611
WH
Single Smart-Cone Screw-In, Stem

11"
17-1/8"
22612
WH
Double Smart-Cone Screw-In, Stem

11"
17-1/2"
Mini-Cone Shade
  
22701                                      22702
  
22705                                      22706
  
22708                                      22709
  
22711                                     22712

MINI-CONE SHADE
SCREW-IN EXTENDER & LIGHT CONVERTERS
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converts from medium base to GU or GZ-10 base for line voltage ES16 or ESD16 halogen lamps up to 50 watts.
Mini-Cone shade & swivel dimensions: Length 4-1/8"; Width 2-5/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
22701
AL,BK,WH
Single Mini-Cone Screw-In
-
6-3/8"


22702
AL,BK,WH
Double Mini-Cone Screw-In
-
5-7/8"


22705
AL,BK,WH
Single Mini-Cone Screw-In, Stem
5"
10-1/2"


22706
AL,BK,WH
Double Mini-Cone Screw-In, Stem
5"
10-7/8"


22708
AL,BK,WH
Single Mini-Cone Screw-In, Stem
8"
13-5/8"


22709
AL,BK,WH
Double Mini-Cone Screw-In, Stem
8"
14"


22711
AL,BK,WH
Single Mini-Cone Screw-In, Stem
11"
16-5/8"


22712
AL,BK,WH
Double Mini-Cone Screw-In, Stem
11"
17"



22800 Shown with AR-111 Lamp
22800 Shown with PAR-36 Lamp
SUPER SPOT SCREW-IN LIGHT CONVERTER
Light Converter let you use low voltage lamps for energy efficiency and to achieve tight beam spreads.
Converts 120 volt medium base socket to 12 volts for use with 12 volt AR-111 or PAR-36 lamps up to 75 watts.
Most existing ceiling lights, track lights, or recessed lights are easily converted to low voltage by simply removing the existing lamp and screwing in the Swivelier Light Converter.
Easily replace a PAR-38 lamp with either a 12 volt AR-111 or PAR-36 lamp.
Compact in size, the light converter maintains similar dimensions of a PAR-38 lamp.
Converter has built-in electronic transformer.
Light Converter dimensions: Overall Length 5-1/2"; Width 4-3/4"
Item
Finish
                Description
Stem
 O.L.
22800
BK, WH
Super Spot Screw-In Light Converter




-
5-1/2"

22805 Shown with PAR-36 Lamp

  
22805                                      22806
  
22808                                     22809
  
22811                                      22812

SUPER SPOT SCREW-IN EXTENDERS
Screw-In Extender and Light Converter let you use easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt AR-111 or PAR-36 halogen reflector lamps up to 75 watts.
Achieve energy efficiency and tight beam spreads.
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converter has built-in electronic transformer.
Super Spot ring & swivel dimensions: Length 5-3/4"; Width 4-3/4"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
22805
AL,BK,WH
Single Super Spot Ring Screw-In, Stem


5
12-1/2
22806
AL,BK,WH
Double Super Spot Screw-In, Stem


5
12-7/8
22808
AL,BK,WH
Single Super Spot Ring Screw-In, Stem


8"
15-1/2"
22809
AL,BK,WH
Double Super Spot Screw-In, Stem


8"
15-7/8"
22811
AL,BK,WH
Single Super Spot Ring Screw-In, Stem


11"
18-1/2"
22812
AL,BK,WH
Double Super Spot Screw-In, Stem


11"
18-7/8"

22900

MR-16 SCREW-IN LIGHT CONVERTER
Light Converter let you use low voltage lamps for energy efficiency and to achieve precise controlled beam spreads. Converts 120 volt medium base socket to 12 volts for use with 12 volt MR-16 lamps, with front glass lens, up to 50 watts.
Most existing ceiling lights, track lights, or recessed lights are easily converted to low voltage by simply removing the existing lamp and screwing in the Swivelier Light Converter.
Easily replace a PAR-20, PAR-30 or PAR-38 lamp with a 12 volt MR-16 lamp.
Very compact in size, the light converter has a built-in electronic transformer.
Light Converter dimensions: Overall Length 4-3/8"; Width 2-1/2"
Item
Finish
                Description
Stem
 O.L.
22900
BK, WH
MR-16 Screw-In Light Converter


-
5-1/2"

22901

  
22905                                      22908
22911



MR-16 SCREW-IN EXTENDERS
Screw-In Extender and Light Converter let you use easily convert the 120 volt medium base socket in an existing recessed fixture into an adjustable low voltage light source using 12 volt MR-16 halogen reflector lamps up to 50 watts.
Achieve energy efficiency and precise controlled beam spreads.
Adjustable Swivelier swivel rotates 360º, angles 90º.
Converter has built-in electronic transformer.
MR-16 Shade & swivel dimensions: Length 2-7/8"; Width 1-1/2"
Transformer housing dimensions:
Round Housing:  Width 2-1/2; Depth 1-1/2
Rectangular Housing: Width 1-3/4" x 1"; Depth 2-3/4"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
22901
AL,BK,WH
Single MR-16 Screw-In

-
6-3/4
22905
AL,BK,WH
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
5
9
22908
AL,BK,WH
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
8"
12
22911
AL,BK,WH
Single MR-16 Screw-In, Stem
(stem length includes transformer housing)
11"
15
     
    Torpedo Shade

    
                                           22072                                      
TORPEDO SHADE SCREW-IN EXTENDERS
Torpedo shade for PAR-38 lamps.
Use medium base reflector halogen lamps, maximum 150 watts.
Adjustable Swivelier swivel socket rotates 360º, angles 90º.
Torpedo shade & swivel dimensions: Length 8-1/2"; Width 5-5/8"
Accessory: Close-Up Cover Plate 29010 (8" dia.) or 29011 (6" dia.)
Item
Finish
                Description
Stem
 O.L.
22072
WH
Torpedo Shade, PAR-38
11"
23-1/4"



29010 Close-Up Cover Shown with Extender

  
                  29010                                    29011
CLOSE-UP COVER PLATE
Use cover plate with all Swivelier Screw-In Extenders to cover recessed fixture opening.
Provides a finished look to the ceiling lighting.
Two attachment springs hook between cover plate and holes or slots in recessed housing to secure cover plate to recessed fixture. Extender then passes through a two inch opening where it is easily screwed into the light socket. Available in two sizes. Use 8" diameter for 6-7" recessed housings. Use 6" diameter for 4-5" recessed housings.
Item
Finish
              Description
29010
WH
Close-Up Cover Plate for use with all Swivelier Screw-In Extenders. 8" diameter, 1/4" deep.
29011
WH
Close-Up Cover Plate for use with all Swivelier Screw-In Extenders. 6" diameter, 1/4" deep.

29980
  
29981                                  29985



    150 Watt Custom Length
Straight Extender


250 Watt Custom Length
Straight Extender





150 Watt Custom Length
Adjustable Swivel Socket Extender
STRAIGHT EXTENDER FOR MEDIUM BASE LAMPS
Item
Finish
                Description
Stem
 O.L.
29980
-
Deluxe 2" Socket Straight Extender. Medium to medium base. Rated 660W-250V. Maximum 150 watts.
-
3-1/8"

29981
-
Deluxe 2-1/8" Socket Straight Extender. Medium to medium base. 4KV Pulse Rated 660W-600V. Use for LED, Halogen, CFL or Metal Halide lamps on 120v to 277v. Maximum 250 watts.
-
3-1/4"
29985
-
Mogul to Medium Base Adapter. Rated 660W-250V.
-
-
CUSTOM LENGTH STRAIGHT EXTENDER
FOR MEDIUM BASE LAMPS
Special
Number
-
Custom Length Non-Adjustable
Straight Extender. Maximum 150 Watts. Medium to Medium Base. Rated 660W-250V.
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
-
-

Special
Number
-
Custom Length Non-Adjustable
Straight Extender. Maximum 250 Watts. Medium to Medium Base. 4KV Pulse Rated 660W-600V.
Use for Halogen or Metal Halide lamps on 120v to 277v.
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
 
-
-
CUSTOM LENGTH ADJUSTABLE EXTENDER
FOR MEDIUM BASE LAMPS
Special Number
-
Custom Length Adjustable
Lite-Flex Swivel Socket Extender.
Maximum 150 Watts
Specify extension desired or overall length required. Extend from 3" or longer. To request more detailed information click below to download catalog page.
-
-

29984
  
Socket sideways               Socket face up
  Use One 29984                  Use Two 29984
Shown with L21705 Extender

RIGHT ANGLE MEDIUM BASE SOCKET ADAPTER
Converts a horizontal facing medium base socket for use with Swivelier Extenders.
Item
Finish
              Description
29984
-
Medium to Medium 90º Elbow
Use an Elbow in a recessed fixture with a side mounted, horizontal facing medium base socket.
With a 90º Elbow, you can screw in an Extender so that the Extender stem is mounted vertically.
You can also use the 90º Elbow to vertically mount screw-in medium base PAR-20, PAR-30 or PAR-38 LED, Halogen or CFL  spot or flood reflector lamps.
When used with chandeliers that have an upward facing medium base socket, use two Elbows, creating a 180º bend. Then screw in an Extender so the Extender mounts vertically.
Elbow has built-in ratchet mechanism that permits adjustment of the Elbow socket for proper alignment.
Lighting Accessories


  
29835                                      29836
CLIP-ON CYLINDER FIXTURE ACCESSORIES
Item
Finish
              Description
29835
BK, WH
PAR-38 Clip-On Cylinder, 5-5/8" diameter

29836
BK, WH
PAR-30 Clip-On Cylinder, 4-1/8" diameter



Specify Color: (AL) Silver Aluminum, (BK) Black, (WH) White
Lamps not included
To order, or for more information, please contact us.